人気ブログランキング | 話題のタグを見る

Metaphorical Dream

scst その5

一応、こんなんも載せておく。
って言いながら、wwnは伏せておく。
小心者なので、すいません。

(1)scst
[root@fct01 ~]# dmesg | grep scst
scst: Attached to scsi0, channel 0, id 0, lun 0, type 0
scst: Attached to scsi1, channel 0, id 0, lun 0, type 0
scst: Attached to scsi4, channel 0, id 0, lun 0, type 5
scst: Processing thread scsi_tgt0 (PID 2654) started
scst: Processing thread scsi_tgt1 (PID 2655) started
scst: Processing thread scsi_tgt2 (PID 2656) started
scst: Processing thread scsi_tgt3 (PID 2657) started
scst: Init thread started, PID 2658
scst: Task management thread started, PID 2659
scst: Management thread started, PID 2660
scst: SCST version 2.0.0-pre1-procfs loaded successfully (max mem for commands 2001MB, per device 800MB)
scst: Enabled features: TRACING
scst: Target 21:00:00:e0:xx:xx:xx:xx (rel ID 1) for template qla2x00tgt registered successfully
scst: Target 21:01:00:e0:xx:xx:xx:xx (rel ID 2) for template qla2x00tgt registered successfully
scst: Target template qla2x00tgt registered successfully
scst: Device 0:0:0:0: TST 0, QUEUE ALG 0, SWP 0, TAS 0, D_SENSE 0, has_own_order_mgmt 1
scst: Device 1:0:0:0: TST 0, QUEUE ALG 0, SWP 0, TAS 0, D_SENSE 0, has_own_order_mgmt 1
scst: Device handler "dev_disk" for type 0 registered successfully
scst: Device handler "dev_disk_perf" for type 0 registered successfully
scst: Virtual device handler vdisk_fileio for type 0 registered successfully
scst: Virtual device handler vdisk_blockio for type 0 registered successfully
scst: Virtual device handler vdisk_nullio for type 0 registered successfully
scst: Virtual device handler vcdrom for type 5 registered successfully

(2)qla2x
[root@fct01 ~]# dmesg | grep qla
qla2xxx 0000:01:08.0: Found an ISP2312, irq 19, iobase 0xffffc20000c4e000
qla2xxx 0000:01:08.0: Configuring PCI space...
qla2xxx 0000:01:08.0: Configure NVRAM parameters...
qla2xxx 0000:01:08.0: Verifying loaded RISC code...
scsi6 : qla2xxx
qla2xxx 0000:01:08.0:
qla2xxx 0000:01:08.1: Found an ISP2312, irq 18, iobase 0xffffc20000c70000
qla2xxx 0000:01:08.1: Configuring PCI space...
qla2xxx 0000:01:08.1: Configure NVRAM parameters...
qla2xxx 0000:01:08.1: Verifying loaded RISC code...
scsi7 : qla2xxx
qla2xxx 0000:01:08.1:
qla2xxx 0000:01:08.0: Cable is unplugged...
qla2xxx 0000:01:08.1: Cable is unplugged...
scst: Target 21:00:00:e0:xx:xx:xx:xx (rel ID 1) for template qla2x00tgt registered successfully
qla2x00t(0): 64 Bit PCI addressing enabled
scst: Target 21:01:00:e0:xx:xx:xx:xx (rel ID 2) for template qla2x00tgt registered successfully
qla2x00t(1): 64 Bit PCI addressing enabled
scst: Target template qla2x00tgt registered successfully
qla2x00t(0): Enabling target mode
qla2xxx 0000:01:08.0: Performing ISP abort - ha= ffff81024dc88608.
qla2xxx 0000:01:08.0: Cable is unplugged...

by mdesign21 | 2010-04-28 23:41 | IT系